MAXDATA QutePC?1000 Guía de usuario Pagina 128

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 163
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 127
128 Technical Reference
129MAXDATA PLATINUM 90002R Server System
Video Port
The main and front panel boards provide a video port interface with a standard VGA-compatible, 15-pin
connector. Only one port is enabled at a time through auto detection of a connected monitor. Onboard
video is supplied by an ATI Rage XL video controller with 8 MB of onboard video SDRAM.
Table 29. Video Connector Pinout
Pin Signal Video Connector
1 VID_R (analog color signal red)



2 VID_G (analog color signal green)
3 VID_B (analog color signal blue)
4 No connection
5 GND
6 GND
7 GND
8 GND
9 No connection
10 GND
11 No connection
12 MONID1 (to support DDCx,
Display Data Channel* Standard)
13 VID_HSYNC (horizontal sync)
14 VID_VSYNC (vertical sync)
15 MONID2 (to support DDCx,
Display Data Channel Standard)
Universal Serial Bus (USB) Interface
The main board provides a double-stacked USB port and the front panel board provides two single
USB port connectors. These built-in USB ports permit the direct connection of four USB peripherals
without an external hub. If more devices are required, an external hub can be connected to either of
the built-in ports.
Table 30. USB Connector Pinout
Pin Signal Dual USB
Connector
Single USB
Connector
A1 Fused Voltage Controlled Current (VCC)
(+5 V /w overcurrent monitor of both port 1 and 2)






 
A2 USBPxM (differential data line)
A3 USBPxP (differential data line)
A4 GND (ground)
B1 Fused VCC (+5 V /w overcurrent monitor of both
port 1 and 2)
B2 USBPxM (differential data line)
B3 USBPxP (differential data line)
B4 GND (ground)
Vista de pagina 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 162 163

Comentarios a estos manuales

Sin comentarios