MAXDATA SR1202 M1 Guía de usuario descargar pdf (Pagina 52)

52 53MAXDATA SR1202 M1 – Technical User GuideTroubleshooting and Problem Solving

Installing an SR1202 RAID Controller Module

IMPORTANT

Host and Expansion Connectors:

Class 1 Laser Product

• If fitted with optical modules, the modules must be a UL (or other North American NRTL)

RECOGNISED COMPONENT, must be approved by TUV (or other European Product safety

test house) and the laser in the module must comply with Laser Class 1, US 21 CFR (J) & EN

60825-1.

EMC Precautions:

If passive copper cables are connected, the cable must not have a connection to a common ground/

earth point.

1. Check for damage, especially to the interface connector - do not install if the pins are bent.

2. With the latches in the open position (see Figure 41), slide the SR1202 RAID Controller Module

into the enclosure until the latches engage automatically (Figure 42).

Figure 41. SR1202 RAID Controller Module Latch Operation

Figure 42. Installing a SR1202 RAID Controller Module (step 2)

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58

Sin comentarios

MAXDATA SR1202 M1 Guía de usuario Pagina 52